High Flux Brackish Water RO Membrane Element
Product size parameters
|
Membrane element size |
A (±2.0mm) |
B (±0.1mm) |
C (±0.5mm) |
D (±0.1mm) |
| 2540 | 1016 | 30.2 | 19.1 | 61 |
|
4040 |
1016 |
26.7 |
19.1 |
100 |
|
8040 |
1016 |
28.8 |
200 |
/ |


Application Scenarios
- Industry: Water supply engineering, industrial water treatment, power generation industry
- Feed Stream: Brackish groundwater, slightly polluted surface raw water, low-colloid cooling blowdown
- Process Objective: Large-volume production of industrial process water and boiler feed water
- Membrane Function: Efficiently separate dissolved salts, generate high-flow qualified permeate; channel design stabilizes flux under high loading
- Application Conditions: Feed requires sedimentation and filtration pretreatment; low colloid and low organic load preferred; pH 2–10, pressure ≤41 bar, temperature ≤45°C

FAQ
Q: What spacer option should I pick for higher flux?
A: 34mil and 46mil feed spacers are both available. The full membrane area delivers high permeate flux, ideal for large-scale brackish water treatment skids.
Q: What is the salt rejection rate of this high-flux BWRO membrane?
A: It maintains 99.5% standard salt rejection, balancing high throughput and stable desalination efficiency.
Q: Can this membrane run continuously at high flow?
A: Yes. Its channel structure suppresses concentration polarization. As long as feed pretreatment is in place, it supports long continuous high-flow operation under 41 bar and 45°C.
Related Knowledge
Membrane Module Storage
System storage instructions:
- Uninstalled membrane modules must be stored at 5~40°C. Do not remove the outer packaging. Maximum storage period is 6 months, counted from the date of manufacture.
- Once the membrane is wetted, it shall remain wet at all times. Do not allow the membrane to dry out after commissioning.
- If the system shuts down for 24 hours, the liquid inside the membrane modules must be thoroughly flushed out.
- If the system remains out of service for 5 days, perform low-pressure flushing with clean water once per day.
- If the system shutdown exceeds 5 days, complete a cleaning procedure to drain the liquid from the modules. Then fill the modules with preservative solution containing 1% sodium bisulfite. (Prepare the preservative solution in the cleaning tank and circulate it through the modules by pump.) Check the pH value of the preservative solution weekly. Replace the solution when pH drops below 3. The preservative solution shall be renewed every month.
Warranty Period
The company warrants the performance of membrane elements for three 3 years. The three-year warranty period shall commence on the earliest of the following dates:
- The date when the reverse osmosis system is put into operation;
- Six 6 months from the date the membrane elements are shipped from the manufacturing site;
- Three 3 months after the membrane elements are shipped from Guangzhou / Shanghai, China to Taiwan of China, Japan, South Korea, Thailand, India, Malaysia, the United States and other designated locations in China.
Hot Tags: High-Flux BWRO Membrane Element, China High-Flux BWRO Membrane Element manufacturers, suppliers, factory, Anti Fouling RO 8040, High Temperature RO 8038, ro membrane high salinity module, ro membrane skid system, ro membrane solute rejection module, spiral wound membrane pressure driven module








