lena.hu@nano-sepmer.com    +8618379535964
Cont

Have any Questions?

+8618379535964

Acid-Tolerant High Pressure NF Membrane
video
Acid-Tolerant High Pressure NF Membrane

Acid-Tolerant High Pressure NF Membrane

- Structure: Spiral-wound nanofiltration element, customized for acidic feed liquid treatment
- Membrane material: Proprietary acid-resistant membrane sheet
- Core advantage: Selectively intercept ions and macromolecules, low performance attenuation in long-run operation
- Separation performance: Salt rejection 90%–98%, high acid recovery rate, stable separation effect
- Available sizes: 2540 / 4040 / 8040
Send Inquiry

Product Introduction

Acid-Tolerant High Pressure NF Membrane

Concentrated Brine Spiral RO Membrane Element

Brand: NANOIMP

OEM / ODM: Acceptable

Supply: Direct manufacturer

Lead time: 3–15 working days

Shipping: Express / Sea freight / Land transport

Origin: Hangzhou, China

Email: lena.hu@nano-sepmer.com

Core models: ASNF1-8040/34FO, ASNF2-8040/34FO

Performance Parameters

model

ASNF1-8040/34FO ASNF2-8040/34FO
Membrane Area(ft2/m2) 365(34)±3%

Ratio of desalinization

75%-95%

Design Flux (LMH)

5-15

Max Operating Pressure(psi/bar) ≤510(35)
Max Operating Temperature (℃) ≤40
Single Element Pressure Differential (psi/bar) 15(1.0)
Continuous Operating pH Range 1-4

Available Custom Dimensions

2540/4040/8040

Dimension Specification

Element Overall Dimensions

A (±2.0mm)

B (±0.5mm)

C (±0.1mm)

2540 1016 28.8 200

4040

1016

19.0

100

8040

1016

28.8

200

.png

 .png

 

Related Knowledge

Membrane Module Storage
 

System storage instructions:

Uninstalled membrane modules must be stored at 5~40°C. Do not remove the outer packaging. Maximum storage period is 6 months, counted from the date of manufacture.

Once the membrane is wetted, it shall remain wet at all times. Do not allow the membrane to dry out after commissioning.

If the system shuts down for 24 hours, the liquid inside the membrane modules must be thoroughly flushed out.

If the system remains out of service for 5 days, perform low-pressure flushing with clean water once per day.

If the system shutdown exceeds 5 days, complete a cleaning procedure to drain the liquid from the modules. Then fill the modules with preservative solution containing 1% sodium bisulfite. (Prepare the preservative solution in the cleaning tank and circulate it through the modules by pump.) Check the pH value of the preservative solution weekly. Replace the solution when pH drops below. The preservative solution shall be renewed every month.

Warranty Period

The company warrants the performance of membrane elements for three 3 years. The three-year warranty period shall commence on the earliest of the following dates:

  • The date when the reverse osmosis system is put into operation;
  • Six 6 months from the date the membrane elements are shipped from the manufacturing site;
  • Three 3 months after the membrane elements are shipped from Guangzhou / Shanghai, China to Taiwan of China, Japan, South Korea, Thailand, India, Malaysia, the United States and other designated locations in China.

Hot Tags: Acid-Tolerant High Pressure NF Membrane, China Acid-Tolerant High Pressure NF Membrane manufacturers, suppliers, factory

Send Inquiry

(0/10)

clearall