lena.hu@nano-sepmer.com    +8618379535964
Cont

Have any Questions?

+8618379535964

Fully Fitted Sanitary Hot Sanitization RO Membrane
video
Fully Fitted Sanitary Hot Sanitization RO Membrane

Fully Fitted Sanitary Hot Sanitization RO Membrane

1. Material Compliance: FDA food contact certification is available. PSU and PP sanitary raw materials resist thermal aging, suitable for hygienic production processes and avoid fluid contamination.
2. Operating Condition: Supports 85°C in-situ pasteurization. Hot water disinfection can be carried out online without disassembly, effectively removing biofilm and reducing chemical disinfectant usage.
3. Membrane Thermal Stability: The membrane flat sheet features great heat resistance. Flux loss stays only 10%-15% after repeated high-temperature treatment, maintaining stable desalination and permeate quality.
4. Structure & Dimension: Dead-space-free spiral-wound design prevents bacterial growth in stagnant zones. Standard sizes 4040/8040 are optional and customizable for easy installation and replacement.
Send Inquiry

Product Introduction

Fully Fitted Sanitary Hot Sanitization RO Membrane

Product size parameters

 

Model

HSRO-8040T95/31SU

HSRO-4040T95/31SU

Membrane area (ft2/m2)

390(36)±3%

91(8.4)±3%

Test throughput (GPD/m3h)

9000(34)±20%

1900(7.2)±20%

Test desalination rate (%)

99.5%

Maximum operating temperature (℃)

≤45 (operating pressure ≤1.0 MPa)

Hot disinfection temperature (℃)

≤90

Temperature rise rate (°C/min)

≤5

High operating pressure (psi/Mpa)

≤600(4.1)

Normal operation pH

2-11

Clean pH

1-12

Extreme cleaning conditions

≤60℃ (150psi/10bar)

 

Application Scenarios

 

  • Industry: Food & beverage, dairy, pharmaceutical, bioengineering, cosmetics, health product, laboratory high-purity water sectors
  • Feed Stream: Raw water, process water, whey feed, high-temperature condensate water, fermentation make-up water, feed for purified water pretreatment
  • Process Objective: Desalination & purification, produce sanitary purified water / pre-WFI water, whey desalination, condensate water reuse, control microbial level of permeate to meet GMP requirements
  • Membrane Function: Reject salts, colloids and microorganisms, withstand up to 90°C in-situ hot sanitization, steadily deliver low-conductivity sanitary permeate
  • Application Conditions: Feed requires pre-treatment to remove suspended solids and free chlorine; heating rate ≤5°C/min during hot disinfection; max continuous operating temperature ≤45°C; not suitable for direct feeding with strong oxidizing or highly corrosive fluid
.png

FAQ

 

Q: What are the temperature limits and heating requirements for normal operation and hot disinfection of this fully fitted sanitary hot sanitization RO membrane?

A: The maximum continuous operating temperature is ≤45℃ (operating pressure ≤1.0 MPa). The maximum hot disinfection temperature can reach 90℃, and the heating rate must be controlled ≤5℃/min. Rapid temperature rise or drop is prohibited.

Q: Which industries is this fully fitted sanitary hot sanitization RO membrane suitable for, and what feed streams can it treat?

A: It applies to food & beverage, dairy, pharmaceutical, bioengineering, cosmetics, health products and laboratory high-purity water sectors. It can treat raw water, process make-up water, whey feed, high-temperature condensate return water, fermentation feed water and pre-WFI feed water.

Q: What restrictions apply to the feed water for this membrane?

A: The feed must be pre-treated to remove suspended solids and free chlorine. Feed liquid containing strong oxidants or highly corrosive media is forbidden, which will cause irreversible damage to the membrane element.

 

Related Knowledge

Notes on Membrane Cleaning

 

  • Never mix different cleaning agents! Mixing will neutralize the cleaning solutions, minimize cleaning efficiency and damage the membrane surface.
  • Do not clean the membrane sheet by hand or with any soft tools that may impair the filtration performance and reduce the desalination capacity of the membrane material.
  • Deionized water shall be used for cleaning and storage to ensure optimal cleaning performance.

 

Warranty Period

The company warrants the performance of membrane elements for three 3 years. The three-year warranty period shall commence on the earliest of the following dates:

  • The date when the reverse osmosis system is put into operation;
  • Six 6 months from the date the membrane elements are shipped from the manufacturing site;
  • Three 3 months after the membrane elements are shipped from Guangzhou / Shanghai, China to Taiwan of China, Japan, South Korea, Thailand, India, Malaysia, the United States and other designated locations in China.

 

Hot Tags: Fully Fitted Sanitary Hot Sanitization RO Membrane, China Fully Fitted Sanitary Hot Sanitization RO Membrane manufacturers, suppliers, factory, Acid Resistant RO 8040, ro membrane ion rejection module, ro membrane low fouling module, ro membrane separation module, ro membrane solute rejection module, spiral wound membrane modular system

Send Inquiry

(0/10)

clearall