Acid-resistant High Pressure Nanofiltration Membrane

Brand Name: NANOIMP
OEM/ODM: Accept
Manufacturer: Yes
Delivery Time: 3-15 days
Shipping Support: Express / Sea/ Land
Place of Origin: Hangzhou, China
E-mail: lena.hu@nano-sepmer.com
Main Models: ASNF1-8040/34FO | ASNF2-8040/34FO
Performance Metrics of NF Membrane Elements
|
model |
ASNF1-8040/34FO | ASNF2-8040/34FO |
| Membrane Area(ft2/m2) | 365(34)±3% | |
|
Ratio of desalinization |
75%-95% |
|
| Design Flux (LMH) |
5-15 |
|
| Max Operating Pressure(psi/bar) | ≤510(35) | |
| Max Operating Temperature (℃) | ≤40 | |
| Single Element Pressure Differential (psi/bar) | 15(1.0) | |
| Continuous Operating pH Range | 1-4 | |
|
Available Custom Dimensions |
2540/4040/8040 | |
Product size parameter
| Element Overall Dimensions |
A (±2.0mm) |
B (±0.5mm) |
C (±0.1mm) |
| 2540 | 1016 | 28.8 | 200 |
|
4040 |
1016 |
19.0 |
100 |
|
8040 |
1016 |
28.8 |
200 |


Application Scenarios
- Lithium extraction from salt lake: Separate and purify acidic salt lake brine, selectively remove impurity ions and enrich lithium resources.
- Sulfuric acid waste liquid recovery: Treat pickling & chemical sulfuric acid waste liquid for cyclic reuse of sulfuric acid.
- Phosphoric acid waste liquid recovery: Purify waste liquid from wet-process phosphoric acid, remove impurities and realize phosphoric acid recycling.
- Acidic material separation: Component separation of various acidic feed liquids to remove harmful impurities.
- Purification and concentration of acidic materials: Purify materials in strong acid system, concentrate and enrich target valuable components.

Related Knowledge
Membrane Module Storage
System storage instructions:
- Uninstalled membrane modules must be stored at 5~40°C. Do not remove the outer packaging. Maximum storage period is 6 months, counted from the date of manufacture.
- Once the membrane is wetted, it shall remain wet at all times. Do not allow the membrane to dry out after commissioning.
- If the system shuts down for 24 hours, the liquid inside the membrane modules must be thoroughly flushed out.
- If the system remains out of service for 5 days, perform low-pressure flushing with clean water once per day.
- If the system shutdown exceeds 5 days, complete a cleaning procedure to drain the liquid from the modules. Then fill the modules with preservative solution containing 1% sodium bisulfite. (Prepare the preservative solution in the cleaning tank and circulate it through the modules by pump.) Check the pH value of the preservative solution weekly. Replace the solution when pH drops below. The preservative solution shall be renewed every month.
Warranty Period
The company warrants the performance of membrane elements for three 3 years. The three-year warranty period shall commence on the earliest of the following dates:
- The date when the reverse osmosis system is put into operation;
- Six 6 months from the date the membrane elements are shipped from the manufacturing site;
- Three 3 months after the membrane elements are shipped from Guangzhou / Shanghai, China to Taiwan of China, Japan, South Korea, Thailand, India, Malaysia, the United States and other designated locations in China.
Hot Tags: Acid-resistant High Pressure Nanofiltration Membrane Element, China Acid-resistant High Pressure Nanofiltration Membrane Element manufacturers, suppliers, factory, sanitary membrane high hygiene module, sanitary membrane protein separation module, sanitary membrane sip compatible module, sanitary membrane sterile water module, Sanitary Spiral UF Membrane 0 22 m, spiral wound membrane ion rejection module










