lena.hu@nano-sepmer.com    +8618379535964
Cont

Have any Questions?

+8618379535964

Nanofiltration Membrane
video
Nanofiltration Membrane

Nanofiltration Membrane

Channel type: Parallel channel, 34 mil; other channel sizes available upon customization
Membrane sheet material: APA
Outer winding type: Fiberglass
Application scenarios: Landfill leachate decolorization, dye decolorization, chlor-alkali denitration, wastewater salt separation, etc.
Send Inquiry

Product Introduction

Nanofiltration Membrane

Patent Modified Acid & High Pressure Resistant Industrial RO Membrane

Brand Name: NANOIMP

OEM/ODM: Accept

Manufacturer: Yes

Delivery Time: 3-15 days

Shipping Support: Express / Sea/ Land

Place of Origin: Hangzhou, China

E-mail: lena.hu@nano-sepmer.com

Model: NFA-8040/34FA | NFB-8040/34FA | NFC-8040/34FA

Product Performance Parameters

 

Model

NFA-8040/34FA NFB-8040/34FA NFC-8040/34FA

Membrane area (ft2/m2)

370(34)±3%

Initial Salt Rejection (%) 98.5% 99% 90% NaCl
Maximum Operating Temperature (℃) ≤45
Continuous Operating pH Range 2-10
Single Element Pressure Differential (psi/bar) 15(1.0)
Cleaning pH Range 1-13
Customizable Sizes 2540/4040/8040

 

Product size parameters

.png

Membrane element size

A (±2.0mm)

B (±0.1mm)

C (±0.5mm)

8040

1016

28.7

200

  .png

Element Overall Dimensions

A (±2.0mm)

B (±0.5mm)

C (±0.1mm)

4040

1016

19.0 

100

2540

1016

19.1

61

 

Application Scenarios

  • Salt separation of wastewater: Selective separation of high-salinity wastewater to realize resource recovery of salts
  • Landfill leachate decolorization: Remove chroma of leachate, intercept organic matter and reduce effluent color
  • Dye decolorization: Remove dye molecules from printing and dyeing wastewater and recover usable materials
  • Chlor-alkali denitrification: Denitrification treatment of brine in chlor-alkali industry to meet inlet water indicators for production
product-403-302

Related Knowledge

 

Membrane Module Storage
 

System storage instructions:

  • Uninstalled membrane modules must be stored at 5~40°C. Do not remove the outer packaging. Maximum storage period is 6 months, counted from the date of manufacture.
  • Once the membrane is wetted, it shall remain wet at all times. Do not allow the membrane to dry out after commissioning.
  • If the system shuts down for 24 hours, the liquid inside the membrane modules must be thoroughly flushed out.
  • If the system remains out of service for 5 days, perform low-pressure flushing with clean water once per day.
  • If the system shutdown exceeds 5 days, complete a cleaning procedure to drain the liquid from the modules. Then fill the modules with preservative solution containing 1% sodium bisulfite. (Prepare the preservative solution in the cleaning tank and circulate it through the modules by pump.) Check the pH value of the preservative solution weekly. Replace the solution when pH drops below. The preservative solution shall be renewed every month.

Warranty Period

The company warrants the performance of membrane elements for three 3 years. The three-year warranty period shall commence on the earliest of the following dates:

  • The date when the reverse osmosis system is put into operation;
  • Six 6 months from the date the membrane elements are shipped from the manufacturing site;
  • Three 3 months after the membrane elements are shipped from Guangzhou / Shanghai, China to Taiwan of China, Japan, South Korea, Thailand, India, Malaysia, the United States and other designated locations in China.

Hot Tags: Nanofiltration Membrane, China Nanofiltration Membrane manufacturers, suppliers, factory, ro membrane ion rejection module, ro membrane low fouling module, ro membrane low salinity module, ro membrane polyamide module, ro membrane post treatment module, spiral wound membrane wastewater treatment module

Send Inquiry

(0/10)

clearall