lena.hu@nano-sepmer.com    +8618379535964
Cont

Have any Questions?

+8618379535964

Brackish Water RO Membrane Element with High Salt Rejection
video
Brackish Water RO Membrane Element with High Salt Rejection

Brackish Water RO Membrane Element with High Salt Rejection

1. Desalination Performance: High-rejection design with 99.5% salt rejection, stable permeate for brackish water.
2. pH Tolerance: Operating pH 2–10, cleaning pH 1–13, suitable for chemical cleaning over wide pH range.
3. Specification Options: 28/34mil feed spacers available, multiple membrane areas to fit various water production conditions.
4. Operational Stability: Max pressure 41bar, max temperature 45℃, feed water SDI ≤5.
Send Inquiry

Product Introduction

Brackish Water RO Membrane Element with High Salt Rejection 

Anti-Fouling Brackish Water RO Membrane Element

Brand Name: NANOIMP

Manufacturer: Yes

Shipping Support: Express / Sea/ Land

Place of Origin: Hangzhou, China

E-mail: lena.hu@nano-sepmer.com

Main Models: ROA-8040/28FA | ROA-8040/34FA

 

Technical Performance Indicators

 

Model

ROA-8040/28FA ROA-8040/34FA

Membrane area (ft2/m2)

400(37)±3% 365(34)±3%
Permeate Flux (GPD / m³·d) 10500(40)±15% 9500(36)±15%

Test desalination rate (%)

99.5% (Min.99.0%)

Max operating temperature (℃)

≤45

Max Operating Pressure (psi / bar) ≤600(41)

 

Internal Structure & Flow Illustration

.png

 .png

Practical Application Scopes

  • Tap water quality improvement: Treat city tap water with advanced purification technology to eliminate hardness and dissolved solids, cut down TDS values and satisfy upgraded water supply requirements.
  • Potable water manufacturing: Purify brackish underground water and lightly saline surface water. Its high interception capacity lowers salt levels to deliver drinking water that meets relevant standards.
  • Industrial pure water and ultra-pure water generation: Acts as the core desalination component in water systems for power, electronic and pharmaceutical sectors. It removes dissolved ions to feed qualified water for ultra-pure water workflows.
  • Process water production: Supplies purified water for food processing and fine chemical manufacturing, featuring consistent desalination efficiency.
product-1-1

Related Knowledge

 

Precautions for Membrane Module Installation

 

No. Precautions Reason Impact Level
1 When taking the membrane module out of the packaging bag, be careful not to scratch the membrane module surface or your hands when using scissors or a knife. When cutting open the packaging bag with scissors or a knife, inserting too deep into the bag may damage the membrane surface. Excessive force may cause cuts to the skin. High
2 Protective gloves must be worn, as the packaging bag contains precision membrane modules. Protective gloves must be worn. Low
3 Wet the sealing ring at the connection with clean water or glycerin. Do not use any lubricants (petroleum products, grease, vaseline, detergents), gasoline, thinners, etc. The material of the collection pipe and other parts is plastic. If petroleum, grease, vaseline or detergents are applied, the collection pipe may crack within a short period. Meanwhile, gasoline and thinners are strictly prohibited, otherwise the membrane performance may drop significantly. When installing membrane modules into the pressure vessel, wet the connection parts and sealing ring with clean water or glycerin for easier installation. Extremely High
4 Handle the membrane module with care. Do not throw or drop it. Damage caused by throwing or dropping the membrane module will affect its performance. High
5 Do not strike with a hammer or install violently. This may cause cracking of the FRP housing. Hammer striking and violent installation of membrane modules are forbidden. The membrane module performance cannot be guaranteed under such circumstances. High

 

Warranty Period

The company warrants the performance of membrane elements for three 3 years. The three-year warranty period shall commence on the earliest of the following dates:

  • The date when the reverse osmosis system is put into operation;
  • Six 6 months from the date the membrane elements are shipped from the manufacturing site;
  • Three 3 months after the membrane elements are shipped from Guangzhou / Shanghai, China to Taiwan of China, Japan, South Korea, Thailand, India, Malaysia, the United States and other designated locations in China.

 

Hot Tags: Brackish Water RO Membrane Element with High Salt Rejection, China Brackish Water RO Membrane Element with High Salt Rejection manufacturers, suppliers, factory, High Temperature RO 8038, ro membrane high salinity module, ro membrane polyamide module, ro membrane separation module, spiral wound membrane pressure driven module, spiral wound membrane wastewater treatment module

Send Inquiry

(0/10)

clearall