lena.hu@nano-sepmer.com    +8618379535964
Cont

Have any Questions?

+8618379535964

Containerized Water Treatment System

Product Overview

 

A Containerized Water Treatment System is a modular water treatment plant installed within an ISO-certified shipping-container enclosure. It integrates selected treatment equipment, filtration units, process piping, instrumentation, and control components into a fully transportable, pre-tested system.
Depending on feed water quality and treatment objectives, the system can be configured with reverse osmosis (RO), ultrafiltration (UF), or other specialized separation technologies. The configuration encompasses pretreatment, membrane separation, chemical dosing, and post-treatment equipment tailored strictly to project requirements.
These systems are engineered for industrial facilities, remote project sites, temporary installations, and locations where rapid deployment and a compact footprint are prioritized. Applications include groundwater treatment, brackish water desalination, and industrial water reuse, subject to comprehensive feed water evaluation.

 
DTRO Skid-Mounted System
Add to Inquiry
DTRO Skid-Mounted System

DTRO (Disc Tube Reverse Osmosis) equipment is a highly efficient water treatment system designed to handle high-concentration and high-salinity wastewater. It is primarily used for landfill leachate
STRO Skid-Mounted System
Add to Inquiry
STRO Skid-Mounted System

STRO reverse osmosis membrane is a specialized product for medium to high concentration and high salinity wastewater treatment. Its integrated equipment is mainly applied in the removal of harmful
Skid-Mounted Seawater Desalination System
Add to Inquiry
Skid-Mounted Seawater Desalination System

Seawater desalination equipment is mainly used to obtain fresh water, with a wide range of uses, such as often used in water-scarce areas/coastal areas and islands and other water-scarce places such
 
Working Principle And System Configuration

The system combines water pretreatment, membrane separation, and post-treatment within a secure, climate-controlled containerized layout.


Container Enclosure:

Housed inside a modified 20ft or 40ft ISO shipping container. Insulation, ventilation, anti-corrosive coatings, and environmental controls are engineered according to site climate conditions.

 

Pretreatment:

Tailored to raw water characteristics, configurations may include multi-media filtration, activated carbon filtration, or precision cartridge filtration to remove suspended solids, turbidity, and oxidants before membrane entry.

Membrane Separation:

Reverse Osmosis (RO): Utilizes spiral-wound polyamide composite membranes under high pressure to reject dissolved salts and minerals.
Ultrafiltration (UF): Utilizes hollow-fiber modules to remove suspended solids, colloids, and macromolecules as a primary clarification or pretreatment barrier.

Chemical Dosing and Post-Treatment:

Automated dosing skids inject antiscalants, pH adjusters, or disinfectants. Optional UV sterilization units are integrated downstream when dictated by application standards.

Piping and Electrical Controls:

Features high-grade process piping (Schedule 80 UPVC / 316L stainless steel), industrial pumps, and an IP55 PLC control cabinet with HMI touch screen and optional remote monitoring gateways.

 

Key Features

 

Modular Equipment Integration:

Factory-assembled and tested piping, vessels, and electrical lines optimized for maintenance access and minimal on-site footprint.

Robust Environmental Protection:

Enclosures feature thermal insulation, ventilation louvers, and marine-grade exterior painting to withstand harsh operating environments.

STRO Skid-Mounted System

Source-Specific Customization:

Pretreatment and membrane trains are matched directly to certified water analysis rather than generic source categorization.

Plug-and-Play Site Utility Design:

Single-point external connections for power, raw water inlet, permeate delivery, and concentrate discharge to accelerate on-site commissioning.

 

Applications and Operating Conditions

 

Target Industries And Applications:

Mining and Mineral Processing: Camp potable water supply and industrial process utility water.
Oil and Gas: Drilling rig utility water and produced water treatment (subject to preliminary oil/solids analysis).
Municipal and Infrastructure: Decentralized community water supply and emergency disaster relief purification.
Construction and Temporary Projects: Temporary site water supply and construction wastewater recycling.

Operating Parameters And Design Basis:

To ensure proper engineering, our team evaluates the following parameters for every project:
Feed Water Source: Groundwater, surface water, brackish water, or secondary effluent.
Water Quality Metrics: TDS, TSS, SDI, pH, temperature, hardness, silica, and TOC.
Capacity and Demand: Required daily permeate output (m3/day or GPM) and operating hours.
Site Constraints: Available power supply (3-phase voltages), ambient temperature range, and discharge limitations.

STRO Skid-Mounted System suppliers

 

 

Technical Specifications

 

 

Model Series

CWT-RO-25

CWT-RO-50

CWT-RO-100

CWT-UF-150

Core Technology

Deep Bed + RO

Multi-Media + RO

Multi-Media + RO

Disc Filter + UF

Nominal Capacity

25 m3/day*

50 m3/day*

100 m3/day*

150 m3/day*

Container Size

20 ft Standard

20 ft High Cube

40 ft High Cube

40 ft High Cube

Membrane Element Type

8-inch Spiral-Wound RO

8-inch Spiral-Wound RO

8-inch Spiral-Wound RO

PVDF Hollow Fiber UF

Recovery Rate (%)

Customized per Analysis

Customized per Analysis

Customized per Analysis

Customized per Analysis

Total Connected Power

Project-Specific

Project-Specific

Project-Specific

Project-Specific

Dry Weight (Approx.)

Approx. 6,200 kg

Approx. 8,500 kg

Approx. 14,200 kg

Approx. 11,000 kg

 

Manufacturing and Quality Control

Material Verification:

Structural steels, pressure vessels, and wetted components are audited against engineering design sheets prior to assembly.

Pressure Testing:

Manifolds and pressure-containing assemblies undergo rigorous hydrostatic testing on the test bench to verify seal integrity.

Electrical and PLC Checks:

Complete control logic verification, I/O signal testing, and simulated loop runs are performed before dispatch.

Documentation Package:

Systems ship with comprehensive English technical records, including P&ID schematics, electrical diagrams, O&M manuals, and instrument calibration reports.

 

Customization and Technical Support
 

Process Engineering Support:

Send your certified water analysis report; our applications engineering team runs computer-aided projections to determine optimal membrane sizing and chemical dosing profiles.

Layout Adaptation:

Enclosure dimensions, access door placements, and internal equipment layouts can be adjusted to meet tight plot plans or specialized electrical codes.

Commissioning and Spares Guidance:

We provide clear installation guidelines, recommended 2-year spare parts lists, and post-delivery technical support.

 

 

FAQ

 

 

Q: What is the typical on-site installation time for a containerized system?

A: Site setup time is minimal because internal piping, pumps, and control systems are pre-assembled at the factory. Installation typically involves anchoring the container, connecting external utility flanges (feed water, permeate, brine), and hooking up the main power supply.

Q: How does the system handle extreme hot or cold climates?

A: Environmental control packages can be integrated based on local climate data. This includes high-density insulation, interior space heaters, air conditioning units, and heat tracing for exposed piping to ensure reliable operation across wide ambient temperature ranges.

Q: What information is required to get an accurate system quotation?

A: To develop a precise technical and commercial proposal, please provide your raw water source, a certified water analysis report, required daily output, target treated water standards, local power supply specs, and destination delivery requirements.

Q: Can these systems treat high-salinity or high-fouling industrial water?

A: Yes, but high-salinity or complex wastewater streams require specialized pretreatment stages (such as media filtration, ultrafiltration, or antiscalant dosing) and customized membrane selection. A representative water sample analysis is required for evaluation.

Q: What spare parts are recommended for long-term operation?

A: We recommend maintaining an inventory of consumable replacement items, including 5-micron cartridge filters, chemical dosing pump diaphragms, replacement O-rings, pressure gauges, and primary instrumentation sensing probes.

Q: Does the control system support remote monitoring?

A: Standard PLC panels support local HMI operation. Optional industrial communication hardware and gateways can be integrated to allow remote SCADA monitoring and alarm notifications where site network conditions permit.

With abundant experience, we are one of the most professional containerized water treatment system manufacturers and suppliers in China. Welcome to wholesale high quality containerized water treatment system in stock here and get pricelist from our factory. We also accept customized orders.

STRO Skid Mounted System, Skid Mounted Seawater Desalination System, containerized water treatment system

(0/10)

clearall